





5HGKB-76(8 m 3 sets of tobacco)
Key words:
Classification:
Parameter configuration table
Project | Technical parameters |
Unit structure | 8 m 3 sets |
Supply voltage/rated frequency | 380V ± 10% three-phase four-wire system/50Hz |
Rated heating capacity | ≥ 32kW |
Overall dimension | 11000 × 2800 × 3600mm |
Cigarette indoor size | 8000 × 2700 × 3550mm |
Smoke load | 3500-4000kg |
Energy consumption | 1100-1500kWh/furnace |
Moisture removal method | The moisture in the air in the barn is discharged in the form of water vapor through the moisture discharge port. |
Rated dehumidification capacity (ambient temperature 25 ℃, indoor dry bulb temperature 50 ℃, wet bulb temperature 39 ℃) | / |
energy efficiency ratio | Heating performance coefficient> 3 |
Condenser, evaporator | Fin type, anti-corrosion and passivation treatment |
Heat recovery heat exchanger | / |
Auxiliary heating | 12kW |
Circulating fan | Protection grade IP54 above, insulation grade F above, fan static pressure ≥ 250Pa, with high and low speed adjustment function, air volume ≥ 9000 m/h |
Sensor | Temperature measurement range 0 ℃ ~ 99.9 ℃, resolution ± 0.1 ℃, measurement accuracy ± 0.5 ℃ |
Controller | Real-time collection of the dry bulb and wet bulb temperature values of the temperature and humidity sensor in the smoke loading room, automatic/manual control of the baking of the circulating fan, heat pump host unit, etc., with the function of receiving instructions from the remote monitoring system. The LCD screen of the integrated control system, the main board of the controller and the transformers, thermistors, chips, capacitors, relays, plug-ins, etc. used in the integrated control system shall be of high reliability and high durability. The service life of the control equipment is more than 6 years. Each baking season controller failure rate ≤ 2%. The control accuracy of dry bulb temperature is ± 0.5 ℃, and the control accuracy of wet bulb temperature is ± 0.5 ℃. Lightning protection measures: GB/T3482-2008/4 |
Thermal insulation material | Insulation material shall be polyurethane composite insulation wallboard with thickness ≥ 50mm.. The inner and outer protective layer of thermal insulation material is coated steel plate above 0.375mm. |
Product inquiry
Our staff will contact you within 24 hours (working days). If you need other services, please call the service hotline:0877-8887988